board_support_common

EV and EVSE board support types

BspEvent: object

Event stream from ControlPilot signal/relais.

A-F: CP states as defined in IEC61851-1 PowerOn: Hardware confirms that contactors switched on correctly (typically mirror contacts indicated successful switch on) PowerOff: Hardware confirms that contactors switched off correctly and are not welded (typically mirror contacts indicated successful switch off)

EvseReplugStarted: Special testing sequence: virtual replugging started EvseReplugFinished: Special testing sequence: virtual replugging stopped Disconnected: Only used on EV side: Not connected to a charging station. Do not use on EVSE side.

properties:

event: string <required>

enum:

- A

- B

- C

- D

- E

- F

- PowerOn

- PowerOff

- EvseReplugStarted

- EvseReplugFinished

- Disconnected

ProximityPilot: object

Current capability (ampacity) of the cable

properties:

ampacity: string <required>

Ampacity value of the cable assembly

enum:

- None

- A_13

- A_20

- A_32

- A_63_3ph_70_1ph

BspMeasurement: object

Bsp Measurement

properties:

proximity_pilot: object <required> (board_support_common-ProximityPilot)

Current capability of the cable

rcd_current_mA: number <optional>

RCD current in mA

cp_pwm_duty_cycle: number <required>

CP PWM Duty Cycle in percent (0-100)