YetiEvDriver¶
Driver module for EV side for the YETI hardware
Auto-Generated Reference¶
Module Configuration¶
serial_port: string <optional>
default: “/dev/ttyUSB0”
Serial port the Yeti hardware is connected to
baud_rate: integer <optional>
default: 115200
Serial baud rate to use when communicating with Yeti hardware
reset_gpio: integer <optional>
default: -1
Reset GPIO number to use to HW reset Yeti. If set <0 it is disabled.
Provides¶
ev_board_support: ev_board_support
provides the board support Interface to low level control control pilot, relais, rcd