13.1.43. TIDA010939¶
Driver module for the Texas Instruments TIDA-010939 reference design
For a detailed handwritten documentation see here
13.1.43.1. Module Configuration¶
serial_port:string <optional>
default: “/dev/ttyUSB0”
Serial port the TIDA010939 hardware is connected to
baud_rate:integer <optional>
default: 115200
Serial baud rate to use when communicating with TIDA010939 hardware
reset_gpio_chip:string <optional>
default: “gpiochip0”
Reset GPIO chip to use to HW reset TIDA010939. If set to empty string, it is disabled.
reset_gpio:integer <optional>
default: 27
GPIO line to use to reset TIDA010939
max_current_A_import:integer <optional>
default: 16
Maximum import current in amps
min_current_A_import:integer <optional>
default: 6
Minimum import current in amps
min_phase_count_import:integer <optional>
default: 3
Minimum phase count for import
max_phase_count_import:integer <optional>
default: 3
Maximum phase count for import
min_current_A_export:integer <optional>
default: 0
Minimum export current in amps
max_current_A_export:integer <optional>
default: 0
Maximum export current in amps
min_phase_count_export:integer <optional>
default: 3
Minimum phase count for export
max_phase_count_export:integer <optional>
default: 3
Maximum phase count for export
has_socket:boolean <optional>
default: False
Set to true if it has a socket, false if it has a permanently attached cable
13.1.43.2. Provides¶
board_support:evse_board_support
provides the board support Interface to low level control control pilot, relais, motor lock
rcd:ac_rcd
RCD interface of the onboard RCD
connector_lock:connector_lock
Interface for the motor lock
Get Support
YouTube Channel
Twitter