13.1.11. EvManager

This module implements a Car simulator that can execute charging sessions using the car_simulator interface.

For a detailed handwritten documentation see here

13.1.11.1. Module Configuration

connector_id:integer <required>
Connector id of the evse manager to which this simulator is connected to
auto_enable:boolean <optional>
default: False
Enable this simulation directly at start. Set to true for pure SIL configs, set to false for HIL.
auto_exec:boolean <optional>
default: False
Enable automatic execution of simulation commands at startup from auto_exec_commands config option.
auto_exec_infinite:boolean <optional>
default: False
If enabled the simulation commands executes infinitely.
auto_exec_commands:string <optional>
default: “”
Simulation commands, e.g. sleep 1;iec_wait_pwr_ready;sleep 1;draw_power_regulated 16,3;sleep 30;unplug
dc_max_current_limit:integer <optional>
default: 300
Maximum current allowed by the EV
dc_max_power_limit:integer <optional>
default: 150000
Maximum power allowed by the EV
dc_max_voltage_limit:integer <optional>
default: 900
Maximum voltage allowed by the EV
dc_energy_capacity:integer <optional>
default: 60000
Energy capacity of the EV
dc_target_current:integer <optional>
default: 5
Target current requested by the EV
dc_target_voltage:integer <optional>
default: 200
Target voltage requested by the EV
support_sae_j2847:boolean <optional>
default: False
Supporting SAE J2847 ISO 2 bidi version
dc_discharge_max_current_limit:integer <optional>
default: 300
Maximum discharge current allowed by the EV
dc_discharge_max_power_limit:integer <optional>
default: 150000
Maximum discharge power allowed by the EV
dc_discharge_target_current:integer <optional>
default: 5
Discharge target current requested by the EV
dc_discharge_v2g_minimal_soc:integer <optional>
default: 20
Discharge minimal soc at which the evse should shutdown
max_current:number <optional>
default: 16
Ac max current in Ampere
three_phases:boolean <optional>
default: True
Support three phase

13.1.11.2. Provides

This implements the car simulator

13.1.11.3. Requirements

ev_board_support:ev_board_support 1
ev:ISO15118_ev 0..1
slac:ev_slac 0..1
powermeter:powermeter 0..1

13.1.11.4. Metadata

13.1.11.4.1. Authors

Cornelius Claussen
Sebastian Lukas
Tobias Marzell

13.1.11.4.2. License