11.1.28. SerialCommHub

Hub to communicate with attached serial devices

11.1.28.1. Provides

main:serial_communication_hub
Implementation of serial communication hub
config:
serial_port:
description:
type:
default:
baudrate:
description:
type:
parity:
description:
type:
ignore_echo:
description:
type:
rxtx_gpio_chip:
description:
type:
default:
rxtx_gpio_line:
description:
type:
rxtx_gpio_tx_high:
description:
type:
config:
serial_port:string
default: /dev/ttyUSB0
Serial port the hardware is connected to
baudrate:integer
default: 9600
Baudrate
parity:integer
default: 0
Parity bit: 0: None, 1: Odd, 2: Even
ignore_echo:boolean
default: False
On some hardware every message that is sent is read back, this setting filters the sent message in the reply.
rxtx_gpio_chip:string
*default: *
GPIO chip to use to switch between RX/TX. An empty string disables GPIO usage.
rxtx_gpio_line:integer
default: 0
GPIO line to use to switch between RX/TX
rxtx_gpio_tx_high:boolean
default: False
GPIO direction, false means low for TX, true means high for TX

11.1.28.2. Metadata

11.1.28.2.1. Authors

Lars Dieckmann
Cornelius Claussen

11.1.28.2.2. License

https://opensource.org/licenses/Apache-2.0