9.25. MicroMegaWattBSP

Driver module for the Micro Mega Watt DC Charging Tester v1.0

9.25.1. Module Configuration

serial_port:string
default: /dev/ttyUSB0
Serial port the Yeti hardware is connected to
baud_rate:integer
default: 115200
Serial baud rate to use when communicating with Yeti hardware
reset_gpio:integer
default: -1
Reset GPIO number to use to HW reset uMWC. If set <0 it is disabled.

9.25.2. Provides

dc_supply:power_supply_DC
Interface for the DC/DC output supply
powermeter:powermeter
provides the Yeti Internal Power Meter
board_support:board_support_AC
provides the board support Interface to low level control control pilot, relais, rcd, motor lock

9.25.3. Metadata

9.25.3.1. Authors

Cornelius Claussen

9.25.3.2. License