11.1.18. MicroMegaWattBSP

Driver module for the Micro Mega Watt DC Charging Tester v1.0

11.1.18.1. Module Configuration

serial_port:string <optional>

default: “/dev/ttyUSB0”

Serial port the Yeti hardware is connected to

baud_rate:integer <optional>

default: 115200

Serial baud rate to use when communicating with Yeti hardware

reset_gpio:integer <optional>

default: -1

Reset GPIO number to use to HW reset uMWC. If set <0 it is disabled.

dc_max_voltage:integer <optional>

default: 1000

Maximum voltage to support

11.1.18.2. Provides

dc_supply:power_supply_DC

Interface for the DC/DC output supply

powermeter:powermeter

provides the Yeti Internal Power Meter

board_support:evse_board_support

provides the board support Interface to low level control control pilot, relais, rcd, motor lock

11.1.18.3. Metadata

11.1.18.3.1. Authors

Cornelius Claussen

11.1.18.3.2. License

https://opensource.org/licenses/Apache-2.0