.. _everest_modules_TIDA010939:

##########
TIDA010939
##########
| Driver module for the Texas Instruments TIDA-010939 reference design


*************************
Handwritten Documentation
*************************

.. include:: index.inc

************************
Auto-Generated Reference
************************


Module Configuration
====================
| **serial_port**: *string* <optional>
| *default: "/dev/ttyUSB0"*
|  Serial port the TIDA010939 hardware is connected to
| **baud_rate**: *integer* <optional>
| *default: 115200*
|  Serial baud rate to use when communicating with TIDA010939 hardware
| **reset_gpio_chip**: *string* <optional>
| *default: "gpiochip0"*
|  Reset GPIO chip to use to HW reset TIDA010939. If set to empty string, it is disabled.
| **reset_gpio**: *integer* <optional>
| *default: 27*
|  GPIO line to use to reset TIDA010939
| **max_current_A_import**: *integer* <optional>
| *default: 16*
|  Maximum import current in amps
| **min_current_A_import**: *integer* <optional>
| *default: 6*
|  Minimum import current in amps
| **min_phase_count_import**: *integer* <optional>
| *default: 3*
|  Minimum phase count for import
| **max_phase_count_import**: *integer* <optional>
| *default: 3*
|  Maximum phase count for import
| **min_current_A_export**: *integer* <optional>
| *default: 0*
|  Minimum export current in amps
| **max_current_A_export**: *integer* <optional>
| *default: 0*
|  Maximum export current in amps
| **min_phase_count_export**: *integer* <optional>
| *default: 3*
|  Minimum phase count for export
| **max_phase_count_export**: *integer* <optional>
| *default: 3*
|  Maximum phase count for export
| **has_socket**: *boolean* <optional>
| *default: False*
|  Set to true if it has a socket, false if it has a permanently attached cable

Provides
========
| **board_support**: :ref:`evse_board_support <everest_interfaces_evse_board_support>`
|  provides the board support Interface to low level control control pilot, relais, motor lock
| **rcd**: :ref:`ac_rcd <everest_interfaces_ac_rcd>`
|  RCD interface of the onboard RCD
| **connector_lock**: :ref:`connector_lock <everest_interfaces_connector_lock>`
|  Interface for the motor lock


********
Metadata
********
Authors
=======
| Cornelius Claussen
| Kai-Uwe Hermann
| Thilo Molitor
| Anton Wöllert
| Fabian Gajek

License
=======
| https://opensource.org/licenses/Apache-2.0