:orphan:


.. _everest_interfaces_ISO15118_ev:


###########
ISO15118_ev
###########

| This interface defines a simple ISO15118 ev.


*********
Variables
*********
| **v2g_session_finished**: *null* 
|  The v2g session between the charger and the car is finished
| **ev_power_ready**: *boolean* 
|  The car is ready for power (HLC)
| **ac_evse_max_current**: *number* 
|  EVSE max current per phase
| **ac_evse_target_power**: *object*  (:ref:`iso15118-AcTargetPower <iso15118-AcTargetPower>`)
|  Evse AC max target power
| **dc_power_on**: *null* 
|  The ev wants to close the dc contactors
| **stop_from_charger**: *null* 
|  The charger wants to stop the charging process
| **pause_from_charger**: *null* 
|  The charger wants to pause the session (only d20)

********
Commands
********
| **start_charging**:*boolean*
|  Start the ev charging process
|  **EnergyTransferMode**: *string* <required> (:ref:`iso15118-EnergyTransferMode <iso15118-EnergyTransferMode>`)
|   Selected energy transfer mode for charging that is requested by the EVCC
|  **DepartureTime**: *number* <required>
|   The time when the EVCC wants to leave the charging station (in seconds)
|  **EAmount**: *number* <required>
|   The amount of energy that the EVCC wants to charge (in kWh)
|  **Result**: *boolean* 
|   Returns true if the evcc simulation started
| **stop_charging**:*void*
|  Stop the ev charging communication process
| **pause_charging**:*void*
|  Pause the ev charging communication process
| **set_fault**:*void*
|  TODO_SL: Set the different ev faults to communicate these errors to the charging station
| **set_dc_params**:*void*
|  Set the target parameters for a dc charging process
|  **EvParameters**: *object* <required> (:ref:`iso15118-DcEvParameters <iso15118-DcEvParameters>`)
|   Target parameters for dc charging
| **set_bpt_dc_params**:*void*
|  Set the bpt parameters for dc charging
|  **EvBPTParameters**: *object* <required> (:ref:`iso15118-DcEvBPTParameters <iso15118-DcEvBPTParameters>`)
|   BPT parameters for dc charging
| **enable_sae_j2847_v2g_v2h**:*void*
|  Enable the SAE J2847 2 V2H V2G
| **update_soc**:*void*
|  Updating the EV SoC state
|  **SoC**: *number* <required>
|   The actual State of Charge from the EV