.. _everest_modules_EvManager:

#########
EvManager
#########
| This module implements a Car simulator that can execute charging sessions using the car_simulator interface.


For a detailed handwritten documentation see :ref:`here <everest_modules_handwritten_EvManager>`

********************
Module Configuration
********************
| **connector_id**:*integer* <required>
|  Connector id of the evse manager to which this simulator is connected to
| **auto_enable**:*boolean* <optional>
| *default: False*
|  Enable this simulation directly at start. Set to true for pure SIL configs, set to false for HIL.
| **auto_exec**:*boolean* <optional>
| *default: False*
|  Enable automatic execution of simulation commands at startup from auto_exec_commands config option.
| **auto_exec_infinite**:*boolean* <optional>
| *default: False*
|  If enabled the simulation commands executes infinitely.
| **auto_exec_commands**:*string* <optional>
| *default: ""*
|  Simulation commands, e.g. sleep 1;iec_wait_pwr_ready;sleep 1;draw_power_regulated 16,3;sleep 30;unplug
| **dc_max_current_limit**:*integer* <optional>
| *default: 300*
|  Maximum current allowed by the EV
| **dc_max_power_limit**:*integer* <optional>
| *default: 150000*
|  Maximum power allowed by the EV
| **dc_max_voltage_limit**:*integer* <optional>
| *default: 900*
|  Maximum voltage allowed by the EV
| **dc_energy_capacity**:*integer* <optional>
| *default: 60000*
|  Energy capacity of the EV
| **dc_target_current**:*integer* <optional>
| *default: 5*
|  Target current requested by the EV
| **dc_target_voltage**:*integer* <optional>
| *default: 200*
|  Target voltage requested by the EV
| **support_sae_j2847**:*boolean* <optional>
| *default: False*
|  Supporting SAE J2847 ISO 2 bidi version
| **dc_discharge_max_current_limit**:*integer* <optional>
| *default: 300*
|  Maximum discharge current allowed by the EV
| **dc_discharge_max_power_limit**:*integer* <optional>
| *default: 150000*
|  Maximum discharge power allowed by the EV
| **dc_discharge_target_current**:*integer* <optional>
| *default: 5*
|  Discharge target current requested by the EV
| **dc_discharge_v2g_minimal_soc**:*integer* <optional>
| *default: 20*
|  Discharge minimal soc at which the evse should shutdown
| **max_current**:*number* <optional>
| *default: 16*
|  Ac max current in Ampere
| **three_phases**:*boolean* <optional>
| *default: True*
|  Support three phase

********
Provides
********
| **main**::ref:`car_simulator <everest_interfaces_car_simulator>`
|  This implements the car simulator

************
Requirements
************
| **ev_board_support**::ref:`ev_board_support <everest_interfaces_ev_board_support>` 1
| **ev**::ref:`ISO15118_ev <everest_interfaces_ISO15118_ev>` 0..1
| **slac**::ref:`ev_slac <everest_interfaces_ev_slac>` 0..1
| **powermeter**::ref:`powermeter <everest_interfaces_powermeter>` 0..1

********
Metadata
********
Authors
=======
| Cornelius Claussen
| Sebastian Lukas
| Tobias Marzell

License
=======
| https://opensource.org/licenses/Apache-2.0