13.1.2. AdAcEvse22KwzKitBSP¶

Board support package module for the AD-ACEVSE22KWZ-KIT reference design

For a detailed handwritten documentation see here

13.1.2.1. Module Configuration¶

serial_port:string <optional>

default: “/dev/ttyUSB0”

Serial port the AD-ACEVSE22KWZ-KIT is connected to

baud_rate:integer <optional>

default: 115200

Serial baud rate to use when communicating with the AD-ACEVSE22KWZ-KIT

reset_gpio_chip:string <optional>

default: “gpiochip0”

Reset GPIO chip to use to HW reset the AD-ACEVSE22KWZ-KIT. If set to empty string, it is disabled.

reset_gpio:integer <optional>

default: 27

GPIO line to use to reset AD-ACEVSE22KWZ-KIT

caps_min_current_A:integer <optional>

default: -1

Minimal current on AC side. For AC this is typically 6, but for HLC this can be less. -1 means use limit reported by HW.

caps_max_current_A:integer <optional>

default: -1

Maximum current on AC side. For AC this is typically 16 or 32, but for HLC this can be less. -1 means use limit reported by HW.

powermeter:powermeter

provides the AD-ACEVSE22KWZ-KIT Internal Power Meter

provides the board support Interface to low level control control pilot, relais, motor lock

Cornelius Claussen
Kai-Uwe Hermann
Thilo Molitor
Anton Wöllert
Ryan Wiebe