13.1.20. MicroMegaWattBSP¶

Driver module for the Micro Mega Watt DC Charging Tester v1.0

13.1.20.1. Module Configuration¶

serial_port:string <optional>

default: “/dev/ttyUSB0”

Serial port the uMWC hardware is connected to

baud_rate:integer <optional>

default: 115200

Serial baud rate to use when communicating with uMWC hardware

reset_gpio_chip:string <optional>

default: “gpiochip0”

Reset GPIO chip to use to HW reset uMWC. If set to empty string, it is disabled.

reset_gpio:integer <optional>

default: 27

GPIO line to use to reset uMWC

dc_max_voltage:integer <optional>

default: 1000

Maximum voltage to support

Interface for the DC/DC output supply

powermeter:powermeter

Interface for the powermeter

provides the board support Interface to low level control control pilot, relais, rcd, motor lock

Cornelius Claussen